REALIS3D
THE MACHINE

One printer. The whole material shelf.

Every REALIS3D part comes off a single Bambu Lab P2S. Below: what makes it more than a PLA machine, and the full filament library — pick the material that fits your part.

THE PRINTER

It prints what cheaper printers can't

Most desktop printers top out at PLA and PETG. A 300 °C hardened nozzle and a sealed, heat-holding chamber let the P2S run the whole engineering shelf — high-temp, high-strength and carbon-fibre materials that entry-level machines simply can't.

The Bambu Lab P2S 3D printer BAMBU LAB P2S
PLA PETG TPU ASA ABS PC NYLON PLA-CF PETG-CF PA-CF

HIGHLIGHTED = NEEDS THE HIGH-TEMP NOZZLE + ENCLOSED CHAMBER · OUT OF REACH FOR MOST DESKTOP PRINTERS

300 °C
MAX NOZZLE (HARDENED)
110 °C
MAX HEATED BED
Enclosed
HEAT-HOLDING CHAMBER
256³ mm
BUILD VOLUME
600 mm/s
MAX PRINT SPEED
0.08–0.28 mm
LAYER HEIGHT RANGE
CURIOUS ABOUT THE HARDWARE? TAP A POINT
01 — NOZZLE

Hardened nozzle

UP TO 300 °C · 0.2 / 0.4 / 0.6 / 0.8 MM

Hardened steel, so it runs abrasive carbon-fibre and high-temperature engineering plastics, not just PLA. Default 0.4 mm; 0.2 mm for fine features, 0.6 / 0.8 mm for strength and speed.

THE FILAMENT LIBRARY

Pick your material

One filament per part — the functional single-colour niche. Choose a material and a colour: the roll updates, and you get the plain-English pros, cons and common uses. That's all you need to pick right.

PLA
MATTE BLACK · SAME-DAY
Material
Colour
Pros
—
Cons
—
Common uses
—

R2.20/G · SAME-DAY · SINGLE COLOUR PER PART

Quote a part in this material
ON THE MACHINE
A part printing inside the enclosed P2S chamber P2S · ENCLOSED CHAMBER

Know your material? Price it.

Upload your part and the quote runs the right settings for the material you pick.

Get an instant quote